Austin Healey Sprite & MG Midget
Alloy Adjustable Trailing Arms for 1/4 Elliptic Spring
Alloy adjustable trailing arms for the 1/4 elliptic Sprite and Midget are not only lightweight but incredibly strong and good looking. The trailing arm tubes are knurled swagged 6061 T-6 aluminum – one piece with no welded in parts and the rod ends are chrome plated C1045 steel with Teflon races. This kit every item needed to install including Grade 8 hardware, dust seals, alloy high misalignment spacers and complete instructions.
FITS:
FITS:
- Austin Healey Sprites 1958-1963
- MG Midget 1962-1963
REAR SUSPENSION LOWERING KIT
Lower your car with our aluminum lowering block kit. The blocks fit between the spring and axle, effectively lowering the car by approximately 1 1/4" to 1 1/2". (the reduction in height will vary depending on the quality of your existing suspension) Recommended for use with standard semi-elliptical springs only. Not for use with re-arched race springs
FITS:
FITS:
- Austin Healey Sprite 1964-1971
- MG Midget 1964-1979
Telescopic Damper Conversion Kit, Rear, Quarter Elliptic
This bolt on rear damper (Shock) conversion is like no other as it
mounts the rear damper unit in a near vertical position. This puts the
shock in the optimum position to absorb uneven ground while producing a
smooth ride and far more rear end control.
To maintain front and rear continuity, adjustable AVO telescopic dampers are used allowing you to adjust the ride to your personal requirements and driving style. Combine this with our front telescopic conversion kit and you will experience a far superior and confidence inspiring car.
NOTE: THIS KIT REQUIRES WELDING
FITS:
To maintain front and rear continuity, adjustable AVO telescopic dampers are used allowing you to adjust the ride to your personal requirements and driving style. Combine this with our front telescopic conversion kit and you will experience a far superior and confidence inspiring car.
NOTE: THIS KIT REQUIRES WELDING
FITS:
- Austin Healey Sprite 1958-1963 Quarter-Elliptic rear spring
- MG Midget 1962-1963 Quarter Elliptic rear spring
Rear Telescopic Damper Conversion Kits
This bolt on rear damper (Shock) conversion is like no other as it mounts the rear damper unit in a near vertical position. This puts the shock in the optimum position to absorb uneven ground while producing a smooth ride and far more rear end control.
To maintain front and rear continuity, adjustable AVO telescopic dampers are used allowing you to adjust the ride to your personal requirements and driving style. Combine this with our front telescopic conversion kit and you will experience a far superior and confidence inspiring car.
FITS:
To maintain front and rear continuity, adjustable AVO telescopic dampers are used allowing you to adjust the ride to your personal requirements and driving style. Combine this with our front telescopic conversion kit and you will experience a far superior and confidence inspiring car.
FITS:
- Austin Healey Sprite 1964-1971 Semi-Elliptic rear spring
- MG Midget 1964-1974 Semi-Elliptic rear spring
Rear Telescopic Damper Conversion Kits
This bolt on rear damper (Shock) conversion is like no other as it mounts the rear damper unit in a near vertical position. This puts the shock in the optimum position to absorb uneven ground while producing a smooth ride and far more rear end control.
To maintain front and rear continuity, adjustable AVO telescopic dampers are used allowing you to adjust the ride to your personal requirements and driving style. Combine this with our front telescopic conversion kit and you will experience a far superior and confidence inspiring car.
FITS:
To maintain front and rear continuity, adjustable AVO telescopic dampers are used allowing you to adjust the ride to your personal requirements and driving style. Combine this with our front telescopic conversion kit and you will experience a far superior and confidence inspiring car.
FITS:
- MG Midget 1975-1979 1500 Semi-Elliptic rear spring
Panhard Bar Kit 1/4 Elliptic Spring
This tubular Panhard Bar Kit fits all 1/4 Elliptic spring Sprites and Midgets and keeps the rear axle located laterally during hard cornering. Easy to install and requires no welding.
FITS:
FITS:
- Austin Healey Sprite 1958-1963
- MG Midget 1962-1963
Panhard Bar Kit Semi Elliptic Spring
This tubular Panhard Bar Kit fits all Semi Elliptic spring Sprites and Midgets and keeps the rear axle located laterally during hard cornering. Easy to install and requires no welding.
FITS:
- Austin Healey Sprite 1964-1971
- MG Midget 1964-1979
|
|
