TIMING CHAIN, Single Row, Heavy Duty
Timing Chain, single row, heavy Duty German made IWIS Chain. This is the only chain to use as it has minimal stretch. All A-Series with simplex chain
FITS:
Morris Minor 1955-1971
Timing Chain, Duplex IWIS Brand
High Quality IWIS timing chain for the double row gears. These German made roller chains are acoustically optimized with gap damping between roller and bush plus excellent wear resistance for high-speed applications. This chain fits without slack and will not stretch unlike the other gears on the market.
FITS:
- Morris Minor
Gear, Crank Duplex
Gear for crankshaft. This is the smaller of the two timing duplex ( double row) gears. This is a cast gear. Fitted to many A series engines as standard
FITS:
Morris Minor 1000
Gear, Camshaft Duplex
Gear, camshaft duplex chain. Designed for the 1275 A-Series engine however, this gear will fit any A-Series engine if fitted with duplex chain..
FITS:
- Morris Minor
Cam Follower HI-Grade Tappet Set
A new super grade tappet (cam follower) has been manufactured to replace the no longer available Isky follower. The new follower is lighter than the original weighing only 43.2 grams vs. 48 grams for the original. This ultimate cam follower is designed to minimize lifter float normally seen in original cam followers which ultimately looses horsepower. Precision ground outside diameter with a smaller chamfered base to give more surface area for extra hi lift cams. Careful and tightly controlled manufacturing ensures best edge consistency, perfect chamfered radius on the base and walls for best rotation and movement. The side walls are also 70 thou taller to maintain maximum stability. Heat treated 3 times to a minimum hardness of 48 HRC / Generally around 52 HRC. Face chilled to a depth of 0.060"/0.177" and nitrided to TNPI before finish grinding for perfect sizing. In addition, these lifters have an oil drain hole, thus preventing oil from collecting in the lifter. This is currently the most robust lifter available for highly tuned engines or regular daily drivers. SET of 8 Followers
FITS:
- Morris Minor
Pulley, Crankshaft with Damper
Pulley with damper for the 1275cc A-series. This pulley does not have a timing mark. Pulley can be used on 948cc-1275cc.
FITS:
Morris Minor 1000
