Banjo Bolt
Banjo Bolt for connector for rear wheel cylinders (slave cylinders). Threads are 3/8" BSF. Requires two copper washers. Copper washers (233220 and 3H550).
FITS:
- Morris Minor 1955 to 1971
Connector, Banjo
Connector, Banjo for rear wheel cylinders (slave cylinders). As this is a brass piece it if often cross threaded and thus the easy answer is to replace it when you are not sure. The flares on this fitting often get damaged do to over tightening of the brake bleeder. Threads are 3/8" BSF. Requires two copper washers. Copper washers (233220 and 3H550).
FITS:
- Morris Minor 1955 to 1971
Brake Bleeder
Brake bleeder for connector for wheel cylinders (slave cylinders). Threads are 3/8" BSF.Â
FITS:
- Morris Minor 1955 to 1971
Brake Bleeder
Brake bleeder for wheel cylinders (slave cylinders). Threads are 3/8" x 24 UNF.Â
FITS:
- Morris Minor 1955 to 1971
Brake Shoe Spring & Adjuster Kit - Rear
The most complete rear brake shoe spring and retainer kit available for the 948cc Sprite and Midget. Kit includes This kit includes; (2) Cylinder End Pull off Spring (2) Abutment End Pull off Springs, (2) Brake Shoe Adjusters & Masks, 4 Brake Shoe Retaining Springs, (2) Handbrake Gaiters (boot)
FITS:
- Morris Minor 1948-1971Â
Switch Brake Light, Lucar Terminals
Switch, Brake Light hydraulic with Lucar push on spade terminals and tapered pipe thread. This switch can be used in place of the original screw connection Brake Light Switch on vehicles from 1948-1962 by crimping on new electrical connectors for the spade terminals.
FITS:
- Morris Minor 1962-1971 ( chassis 990290 on)