Brake & Clutch Master Cylinder Twin 7/8" Bore
This is a combination brake and clutch master . New Cylinder made in the UK by AP Caparo - Original Equipment for drum front brake equipped vehicles.
FITS:
FITS:
- Austin Healey Sprite MkI, MkII 1958 to 1963 (c) AN5, (c) H-AN6-101 to (c) H-AN6-24731, (c) G-AN1
- MG Midget MkI 1962 to 1963, (c) AN5, (c) H-AN6-101 to (c) H-AN6-24731, (c) G-AN1
- MGA 1500 1956 to 1959
- Triumph TR2, TR3 to (c) TS13045, 1952-1956
AP Brake & Clutch Master Cylinder Twin 3/4" Bore
AP/Caparo - Original Equipment combination brake and clutch master cylinder. The correct brake master cylinder for disc brake equipped vehicles. The cylinder has a 3/4 (0.75) bore and uses 3 11/16 long push rods.
Fits:
- Austin Healey Sprite MkIII 1098 - 1964-1966 with Front Disc Brakes
- MG Midget MkII 1098 - 1964-1966 with Front Disc brakes.
Clutch Master Sprite - Midget
Clutch Master Cylinder from the OEM manufacturer AP Caparo. Only install the finest - the original cylinder
FITS:
FITS:
- Austin Healey Sprite 1967-1971
- MG Midget 1967-1979
Clutch Slave Cylinder Sprite Midget to 66
This is an OEM style high quality clutch slave cylinder with a 7/8" bore.
FITS:
- Austin A40 1958 to 1962
- Austin Healey Sprite 1958 to 1966
- MG Midget 1962 to 1966
Clutch Slave Cylinder Sprite Midget to 66
This is a clutch slave cylinder with a 7/8" bore.
FITS:
- Austin A40 1958 to 1962
- Austin Healey Sprite 1958 to 1966
- MG Midget 1962 to 1966
Clutch Slave Cylinder Sprite and Midget 1275
This is an OEM AP high quality clutch slave cylinder with a 1" bore for the 1275.
FITS:
- Austin Healey Sprite 1275 1967-1971
- MG Midget 1275 1967-1974
Clutch Slave Cylinder Sprite and Midget 1275
This is a clutch slave cylinder with a 1" bore for the 1275.
FITS:
- Austin Healey Sprite 1275 1967-1971
- MG Midget 1275 1967-1974
Push Rod Slave Cylinder
Push rod for slave cylinder to clutch fork. The rod length is 2.75 inches overall (2.375 end to center of hole)
Fits"
Fits"
- Austin Healey Sprite 1958-1966
- MGA
- MGB
- MG Midget 1962 -1966
Push Rod 1275
Clutch slave cylinder push rod for the 1275. The length of the Rod is 3 inches (2 11/16 end to center of hole)
FITS:
FITS:
- Austin Healey Sprite 1275 1967-1971 G-AN4 to G-AN5, H-AN9 to H-AN10, A-AN10, 1275cc
- MG Midget 1275 1967-1974 G-AN4 to G-AN5, H-AN9 to H-AN10, A-AN10, 1275cc
REMOTE STEEL BRAIDED CLUTCH BLEED KIT
A stainless steel braided remote clutch bleed hose kit This is the best answer to bleeding the Austin Healey Sprite or MG Midget clutch. Our stainless steel braid hose kit mounts the bleed screw up high in the engine bay. This Stainless Steel clutch bleed line consists of a Kevlar braided sheath over extruded Teflon tubing, which is protected with a stainless steel outer sleeve and then coated with a poly vinyl clear shrink, these hoses are truly state of the art.
FITS:
FITS:
- Austin Healey Sprite 1958-1971
- MG Midget 1962-1974
