Exhaust Systems, Mufflers, Tips

LARGE BORE LCB Exhaust Manifold (Header) for MORRIS MINOR

$345.00
Add to Cart
Noticeable performance gains can be had by simply bolting on a free flow exhaust system. Your Morris will sound sporty, yet not obnoxious, and throaty, yet mellow.  In other words, it will sound great, and the neighbors won't mind! A Maniflow LCB (Long center branch) header is specially designed to fit the Morris Minor engine compartment.

Stainless Steel Exhaust System

$350.00
Add to Cart
Exhaust System Stainless Steel 2 piece for easy installation and shipping
FITS:
  • Morris Minor Sedan, Traveller, Convertible 803cc, 948cc 1098cc

Large Bore Front Pipe

$60.00
Add to Cart
Large Bore Exhaust front down pipe 1-1/2" dia. for use with large bore exhaust manifold and larger engines 1098-1275cc.  Mild Steel
FITS:
  • Morris Minor Sedan, Traveller, Convertible, LCV

Large Bore Center Pipe & Muffler

$105.75
Add to Cart
Large Bore 1-1/2" center pipe and muffler to fit large bore down pipe (EXH1002AZ).  This fits chassis in standard location.  Designed for better performance with larger size engines (1098cc-1275cc)  Mild Steel
FITS:
  • Morris Minor Sedan, Traveller, Convertible

Large Bore Rear Pipe

$74.00
Add to Cart
Large Bore rear Exhaust pipe (1-1/2") to fit large bore center pipe (EXH1002BZ)  Mild Steel        Does not fit Pickup or Van
FITS:
  • Morris Minor Sedan, Traveller, Convertible

Exhaust Fitting Kit

$24.20
Add to Cart
Complete fitting kit for the standard exhaust system, all of the original hangers, brackets and hardware come packaged with the manifold clamp.  There is no need to adapt 'universal' hangers from the local auto parts store.
FITS:
  • Morris Minor Sedan, Traveller, Convertible 803cc, 948cc, 1098cc

Manifold Clamp Heavy Duty

$5.75
Add to Cart
Standard size heavy duty exhaust manifold clamp
FITS
  • Morris Minor Sedan, Traveller, Convertible  803cc, 948cc, 1098cc
  • Morris LCV Pickup, Van

Large Bore Manifold Clamp Heavy Duty

$5.75
Add to Cart
Large Bore (1-5/8") heavy duty exhaust manifold clamp for use with 1-1/2" exhaust systems (1098cc - 1275cc)  or when fitting Sprite /Midget exhaust manifolds
FITS
  • Morris Minor Sedan, Traveller, Convertible 
  • Morris LCV Pickup, Van
Ol Phartz Partz
34835 Avenue D
Yucaipa, CA 92399
909-570-4322
Customer  Service
Tech  Center
  These are bolt-on kits and comes in several stages for road or race applications. The full kits come complete with new discs, calipers, pads, hubs in some cases, fitting kit and full instructions with installation photos. All you need to install is time and tools. 
 
These Big Brake upgrade kit is designed to exceed the performance of the factory OE brakes in two key areas: First, larger diameter rotors which increase heat capacity, allowing a driver to brake harder stop-after-stop while reducing chance of brake fade.  Second, stiffer lightweight billet 4 piston calipers and stainless steel lines reduce system compliance while providing a consistent pedal feel and very confidence inspiring brake responsiveness.
 
The key, however, is to increase heat capacity and reduce compliance without upsetting the vehicle's stock front-to-rear brake torque ratio which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking. 
 
In contrast, a brake upgrade that adds too much front torque (as many do) will reduce your car's ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver's control of brake input. All of these elements have been optimized in the Ol Phartz Partz Big Brake kits.
 
Combining the largest rotor possible to fit under standard factory wheels and  four piston billet calipers, the Ol Phartz Partz Big Brake kits represent the next generation of braking for your British sports car.  These kits have calipers that provide low-maintenance performance, a huge weight savings, and high temperature capacity for both street and track.
 
These Big Brakes fit snugly inside production wheels and a many aftermarket alloy wheels.  Some of the factory steel wheels will require a wheel spacer for caliper clearance, this will be noted with each kit.   Our kits contain DOT compliant stainless steel braided brake lines along with a complete hardware package for a safe and easy DIY install.  All of the kit hardware is grade 8, stainless or military specification.   Cross-drilled or slotted rotors are available at an additional charge. 

Oil Filter Felt

$9.05
Add to Cart
The original oil filters were felt.  We have been able to get some of these filters. Two manufactures of oil filter were used over the course of time, Tecalemit and Purolator.  Fortunately the elements for both will interchange.  They do, however require different sealing gaskets.  Our filters have both thickness of sealing rings in the package.  This filter was used on early "B" series engine elusively throughout the 50's and 60's and is a good alternative to the GFE102 paper filter.

Reverse Light Switch

$34.95
Add to Cart
Reverse (backup lamp) switch for 1275
FITS:
  • Austin Healey Sprite 1968-1971
  • MG Midget 1968-1974

Oil Filter Felt

$7.49
Add to Cart
The original oil filters were felt.  We have been able to get some of these filters. Two manufactures of oil filter were used over the course of time, Tecalemit and Purolator.  Fortunately the elements for both will interchange.  They do, however require different sealing gaskets.  Our filters have both thickness of sealing rings in the package.  The 803cc engine used a different filter these only fit the 948cc and 1098cc

Copper Washer

$0.75
Add to Cart
Copper Washer, Large

Water Pump with Large Impeller

$26.85
Add to Cart
These pumps have the same aluminum housing with the deep cast impeller and the by-pass hose take off. This higher capacity was original equipment on the 1098cc engines and more coolant then smaller impeller pumps on the 948 engines  These water pumps have the much larger impeller, it sticks into the block very slightly more than 1/2"(14.03mm). This water pump will fit all 1098cc blocks and the small bore block 948cc.
FITS:
  • Morris Minor 1963-1971
  • May be retro fitted to all earlier A-Series Engines for more capacity. 
Watch our video on Ol Phartz Partz