Clutch Set 3-pc Borg & Beck 948 Sprite Midget
FITS:
- Austin A30, A35, A40 Farina
- Austin Healey Sprite with 948cc Engine 1958-1963
- MG Midget with 948cc Engine 1962-1963
Clutch Set 3-pc Borg & Beck 1098 Sprite Midget
FITS:
- Austin Healey Sprite 1964-1966 (10CC & 10CG Engine)
- MG Midget 1964-1966 (10CC & 10CG Engine)
Clutch Set 3-pc Borg & Beck 1275 Sprite Midget
3 piece clutch kit for the 1275 (12CC, 12CE and 12V A-series Engine) , This clutch configuration is different from the other engine combinations in that the clutch has the size of 165mm or 6 1/2 inches with a spline count of 10. The cover or pressure plate is of the diaphragm type only used on the 1275 engine with a higher profile release bearing. The bearing has a height of 1.275 inches from the top of the pivot to the carbon face. It is very important that you have the correct flywheel and clutch fork (22G168 or 22G118) to insure proper clutch release.
FITS:
- Austin Healey Sprite 1967-1971 (12CC, 12CE & 12V Engine)
- MG Midget 1967-1974 (12CC, 12CE & 12V Engine)
Spigot (Pilot) Bearing
Spigot (Pilot) Bearing. This bearing is fitted into the rear of the crankshaft to center the imput shaft of the gearbox. 5/8" in diameter Bronze Bush. Fits 948-Early 1275 A Series Engines.
FITS:
- Austin Healey Sprite 1958-1971 up to 12CC engines
- MG Midget 1962-1971 up to 12CC engines
- Morris Minor 1955-1971 ALL Models
Spigot (Pilot) Bearing
Spigot( Pilot) Bearing for the 1275cc A-Series engine. This is a needle roller type bearing with a 3/4" OD. Fits late 12 CC and later 1275cc engines
FITS:
- MG Midget 1971 -1974 12cc, 12ce, 12v Engines
Clutch Fork Ribcase Gearbox 1098 cc, 1275cc
FITS:
- Austin Healey Sprite 1963-1971
- MG Midget 1963-1974
Clutch Fork Gaiter
Clutch fork to transmission gaiter (boot)
FITS:
- Austin Healey Sprite 1958 to 1971
- MG Midget 1962 to 1974
PEDAL PAD, brake & clutch
Pedal Pad, Clutch and Brake Pedals
FITS:
- Austin Healey Sprite 1958-1971
- MG Midget 1962-1979