Wheel Cylinder Front Left, Sprite, MGA, MG Midget, TR3

$35.10

Add to Cart

Wheel Cylinder Front Left Hand for AH Sprite, MG Midget 1958 to 1963, MGA, Triumph TR2, TR3 Made in the UK by AP/Caparo. Two Cylinders are needed per car.

FITS:

• Austin Healey Sprite MkI, MkII 1958 to 1963  (c) AN5, (c) H-AN6-101 to (c) H-AN6-24731, (c) G-AN1
  
• Hillman Minx MkVII, MkVIII 1954 to 1956
  
• MG Magnette ZA, ZB 1954 to 1959
  
• MG Midget MkI 1962 to 1963, (c) AN5, (c) H-AN6-101 to (c) H-AN6-24731, (c) G-AN1
  
• MGA 1500 1956 to 1959
  
• Triumph TR2, TR3 to (c) TS13045, 1952-1956

Wheel Cylinder Front Right, Sprite, MGA, MG Midget, TR3

$35.10

Add to Cart

Wheel Cylinder Front Right Hand for AH Sprite, MG Midget 1958 to 1963, MGA, Triumph TR2, TR3 Made in the UK by AP/Caparo. Two Cylinders are needed per car.
FITS:

• Austin Healey Sprite MkI, MkII 1958 to 1963  (c) AN5, (c) H-AN6-101 to (c) H-AN6-24731, (c) G-AN1
• Hillman Minx MkVII, MkVIII 1954 to 1956
• MG Magnette ZA, ZB 1954 to 1959
• MG Midget MkI 1962 to 1963, (c) AN5, (c) H-AN6-101 to (c) H-AN6-24731, (c) G-AN1
• MGA 1500 1956 to 1959
• Triumph TR2, TR3 to (c) TS13045, 1952-1956

Wheel Cylinder .875 Bore

$42.45

Add to Cart

Rear Wheel Cylinder .875".  This  wheel cylinder fits several vehicles and used for TR3A to TR6 for more rear braking pressure.  To counteract the lack or rear brakes larger rear cylinder can be fitted  - increasing the pressure exerted on the rear shoes and producing a better balance between front and rear braking provides significant better stopping. This modification is essential for all competition cars.
FITS:

• Austin A50, A55 Cambridge 1956 to 1959
• MG Magnette MkIII, MkIV 1959 to 1962
• Morgan 1958 to 1993
• Sunbeam Alpine Mk1 and MkII 1959 to 1963
• Triumph TR 3 A & B (9" Brakes)TR4, TR4A, TR6 (Larger bore replacement. Replace only in pairs.)
  

MG Magnette ZA & ZB Rear Disc Brake Conversion Kit

$1,485.00

Add to Cart

Rear Disc Brake Kit (requires Disc Front Brakes)

• 10.25" Rotors
• Calipers With Proper Size Pistons for Balanced Braking 
• Billet Alloy 6061T6 Mounting Brackets 
• Stainless Steel Braided Brake Lines
• Rear Hub Bearings, Gaskets and Seals
• Uses Original Emergency Brake Cables 
• Grade 8 Hardware
• No additional parts NECESSARY to install kit
• Complete Instruction Manual

This kit will fit all ZA or ZB MG Magnettes that have been modified for front disc brakes.

Back to Magnette