King Pin Kit Disc Brake
King Pin set with all bushings and seals for BOTH SIDES (LH & RH) of vehicles equipped with disc front brakes
FITS:
FITS:
- Austin Healey Sprite 1963-1971
- MG Midget 1963-1979
King Pin Dust Tube Set
Dust Tube set with upper a lower dust tubes and springs, fits either side (RH or LH). Set fits the disc brake equipped vehicles produced from 1963-1979
FITS:
FITS:
- Austin Healey Sprite 1963-1971
- MG Midget 1963-1979Â
Wishbone Spring Pan
This is a wishbone spring pan with pivot pin made in the UK. Unlike the other aftermarket units that are available the pans these high quality wishbones have the correct strengthening plates that to insure you are getting a quality product. Without the strengthening plates the arm will flex and wear out quickly which will give your car an unsettled feel in corning. These wishbones have the mounting holes for Anti Roll Bar attachment. The fit on the pan is perfect for an easy fit.
FITS:
FITS:
- Austin Healey Sprite 1958-1971
- MG Midget 1962-1979
Control Arm Bushing, Rubber
This is a Metropolitan inner control arm bushing for both the upper and lower control arms. Quantity of 16 bushes is required per car
FITS:
- Metropolitan 1952-1961Â
PIN/BOLT, fulcrum, top trunnion bush
This is the upper outer fulcrum bolt or shock pin that secures the shock to the king pin. Quantity 2 required per car
FITS:
FITS:
- Austin Healey Sprite 1958-1971
- MG Midget 1962-1979
- Metropolitan 1952-1961
AVO Frontline Telescopic Damper Conversion
This renowned kit transforms the ride and handling of the Sprite & Midget.This suspension kit has been designed to overcome some of the weaknesses of the original suspension arrangement and give a more positive controlled movement of the suspension.
This bolt on kit includes new top arm assemblies which replace the lever arm damper, providing more torsional and lateral rigidity which has an immediate steadying effect on the handling of the car. This rigidity also improves the braking effect as the ‘twisting’ effect usually experienced under heavy cornering and braking is eliminated by the top arm.
The top arm has also been designed to give 2 degrees of negative camber to tighten up your Sprite or Midget’s handling. The negative camber reduces understeer giving quicker cornering response and superior road holding.
The AVO adjustable telescopic dampers has been chosen for this kit for their progressive damping, as the suspension movement increases the damping increases – this is not possible with the lever arm Armstrong damper.
FITS:
This bolt on kit includes new top arm assemblies which replace the lever arm damper, providing more torsional and lateral rigidity which has an immediate steadying effect on the handling of the car. This rigidity also improves the braking effect as the ‘twisting’ effect usually experienced under heavy cornering and braking is eliminated by the top arm.
The top arm has also been designed to give 2 degrees of negative camber to tighten up your Sprite or Midget’s handling. The negative camber reduces understeer giving quicker cornering response and superior road holding.
The AVO adjustable telescopic dampers has been chosen for this kit for their progressive damping, as the suspension movement increases the damping increases – this is not possible with the lever arm Armstrong damper.
FITS:
- Austin Healey Sprite 1958-1971
- MG Midget 1962-1979
