EBC BRAKE PADS

High efficiency EBC Greenstuff brake pads built with aramid fiber, fully shimmed, slotted and chamfered and featuring the EBC patented Brake-in coating for fast pad seating after install.They are designed to deliver better brake effect up to 600°C (1100°F). EBC Greenstuff has a high initial brake effect which will give you confidence from first application of the brake pedal. There is no such thing as a NO DUST pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55.

EBC Greenstuff Disc Pad Set AH BJ8, MGC, Triumph TR3B, TR4, TR6, GT6

$79.85
Add to Cart
High efficiency EBC Greenstuff brake pads built with aramid fiber, fully shimmed, slotted and chamfered and featuring the EBC patented Brake-in coating for fast pad seating after install.

FITS:
  • Austin Healey BJ8 From 26705
  • MGC 
  • Triumph TR3B
  • Triumph TR4-4A
  • Triumph TR250
  • Triumph TR6 to CC81078 
  • Triumph GT6 1966 to 1971

Disc Pad Set MGB

$62.95
Add to Cart
FITS:
MGB 1962-1980

EBC GREENSTUFF Brake Pads

$89.20
Add to Cart
FITS:
  • Aston Martin DB4 Vantage 59-65 (Front & Rear)
  • Jaguar MK-1 (2.4L/3.4L) 56-59 (Front & Rear)
  • Jaguar MK-2 (2.4L/3.4L/3.8L) 60-67 (Front & Rear)
  • Jaguar E-Type  61-71 (Front & Rear)
  • Jaguar XK150 58-61 ( Front & Rear)
  • Jaguar 340 (3.4L) 67-69 (Front & Rear)
  • Jaguar (Rear) 420G (4.2L) 66-71, MK-9 (3.8L) 58-61, MK-10 (3.8L w/ Dunlop Calipers) 61-64.
  • MG Twin Cam (Front & Rear)
  • MGA Mk II Deluxe ( Front & Rear)

Disc Pad Set MGA 1600

$130.60
Add to Cart
FITS:
  • MGA: 1600cc, MkII; 1959-62

Disc Pad Set Mini, AH Sprite, MG Midget, TR7

$49.85
Add to Cart
FITS:
  • Austin Mini 1984-On
  • Austin Healey Sprite 1965 to 1969 MG1100 1962 to 1967 
  • MG Midget 1965 to 1979 
  • Triumph TR7

EBC GREENSTUFF Brake Pads MGB Oversize

$94.95
Add to Cart
Originally designed for the MGB GT V8, these can be fitted to the stock MGB caliper. With more swept
area, you get better braking. These EBC Greenstuff pads are premium street/sport pads for cars up to
200bhp used for general spirited street driving.
Ol Phartz Partz
34835 Avenue D
Yucaipa, CA 92399
909-570-4322
Customer  Service
Tech  Center

TLS33-030

$9.95
Add to Cart

Make putting in your clutch a little bit easier with this tool.

Pilot dia. inch: 0.62"

Pilot dia. Metric: 15.748

Spline count: 23

Spline decimal: 15.748

Spline inch: 1"

Spline metric: 25.4

FITS:

  • MG MGA 1961-62

TLS33-030

$9.95
Add to Cart

Make putting in your clutch a little bit easier with this tool.

Pilot dia. inch: 0.62"

Pilot dia. Metric: 15.748

Spline count: 23

Spline decimal: 15.748

Spline inch: 1"

Spline metric: 25.4

FITS:

  • MG MGA 1961-62
  These are bolt-on kits and comes in several stages for road or race applications. The full kits come complete with new discs, calipers, pads, hubs in some cases, fitting kit and full instructions with installation photos. All you need to install is time and tools. 
 
These Big Brake upgrade kit is designed to exceed the performance of the factory OE brakes in two key areas: First, larger diameter rotors which increase heat capacity, allowing a driver to brake harder stop-after-stop while reducing chance of brake fade.  Second, stiffer lightweight billet 4 piston calipers and stainless steel lines reduce system compliance while providing a consistent pedal feel and very confidence inspiring brake responsiveness.
 
The key, however, is to increase heat capacity and reduce compliance without upsetting the vehicle's stock front-to-rear brake torque ratio which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking. 
 
In contrast, a brake upgrade that adds too much front torque (as many do) will reduce your car's ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver's control of brake input. All of these elements have been optimized in the Ol Phartz Partz Big Brake kits.
 
Combining the largest rotor possible to fit under standard factory wheels and  four piston billet calipers, the Ol Phartz Partz Big Brake kits represent the next generation of braking for your British sports car.  These kits have calipers that provide low-maintenance performance, a huge weight savings, and high temperature capacity for both street and track.
 
These Big Brakes fit snugly inside production wheels and a many aftermarket alloy wheels.  Some of the factory steel wheels will require a wheel spacer for caliper clearance, this will be noted with each kit.   Our kits contain DOT compliant stainless steel braided brake lines along with a complete hardware package for a safe and easy DIY install.  All of the kit hardware is grade 8, stainless or military specification.   Cross-drilled or slotted rotors are available at an additional charge. 

Oil Filter Felt

$9.05
Add to Cart
The original oil filters were felt.  We have been able to get some of these filters. Two manufactures of oil filter were used over the course of time, Tecalemit and Purolator.  Fortunately the elements for both will interchange.  They do, however require different sealing gaskets.  Our filters have both thickness of sealing rings in the package.  This filter was used on early "B" series engine elusively throughout the 50's and 60's and is a good alternative to the GFE102 paper filter.

Reverse Light Switch

$34.95
Add to Cart
Reverse (backup lamp) switch for 1275
FITS:
  • Austin Healey Sprite 1968-1971
  • MG Midget 1968-1974

Oil Filter Felt

$7.49
Add to Cart
The original oil filters were felt.  We have been able to get some of these filters. Two manufactures of oil filter were used over the course of time, Tecalemit and Purolator.  Fortunately the elements for both will interchange.  They do, however require different sealing gaskets.  Our filters have both thickness of sealing rings in the package.  The 803cc engine used a different filter these only fit the 948cc and 1098cc

Copper Washer

$0.75
Add to Cart
Copper Washer, Large

Water Pump with Large Impeller

$26.85
Add to Cart
These pumps have the same aluminum housing with the deep cast impeller and the by-pass hose take off. This higher capacity was original equipment on the 1098cc engines and more coolant then smaller impeller pumps on the 948 engines  These water pumps have the much larger impeller, it sticks into the block very slightly more than 1/2"(14.03mm). This water pump will fit all 1098cc blocks and the small bore block 948cc.
FITS:
  • Morris Minor 1963-1971
  • May be retro fitted to all earlier A-Series Engines for more capacity. 
Watch our video on Ol Phartz Partz