Clutch Set 3-pc Borg & Beck 803 & 948
3 piece Clutch Set for the 803cc & 948cc (APJM, 8AG, & 9M A-series Engine) from original manufacturer Borg & Beck, This clutch configuration is different from the other engine combinations in that the clutch has the size of 158mm or 6 1/4 inches with a spline count of 10. This smaller clutch has tall fingers on the cover or pressure plate which requires a lower profile release bearing. The bearing has a height of .775 inches from the top of the pivot to the carbon face. It is very important that you have the correct flywheel and clutch fork (9G135 or 22A22) to insure proper clutch release.
FITS:
FITS:
- Morris Minor 1955 - 1962
Clutch Set 3-pc Borg & Beck 1098
3 piece clutch kit for the 1098 (10AB, 10MA & 10ME A-series Engine) , This clutch configuration is different from the other engine combinations in that the clutch has the size of 184mm or 7 1/4 inches with a spline count of 10. Due to the size of the clutch the cover or pressure plate is much taller with a lower profile release bearing. the bearing has a height of 1.075 inches from the top of the pivot to the carbon face. It is very important that you have the correct flywheel and clutch fork (10G300) to insure proper clutch release.
FITS:
FITS:
- Morris Minor Series V 1098Â 1963-1971
Clutch Fork
A NEW clutch fork for the ribcase gearbox in a Morris Minor with mechanical linkage. This fork fits all Morris with ribcase gearbox. This is a NEW fork not a second hand part
FITS:
FITS:
- Morris Minor 1963-1971
- Morris Minor with ribcase gearbox with mechanical clutch linkage
Clutch Fork Ribcase Gearbox and Hydraulic Clutch
A NEW clutch fork for the ribcase gearbox in a Morris Minor 1098cc and 1275cc with hydraulic clutch linkage. This fork fits all RHD & LHD Morris with ribcase gearbox . This is a NEW fork not a second hand part
FITS:
FITS:
- Morris Minor with ribcase gearbox with hydraulic clutch linkage
Clutch Lever for Left Hand Drive
Clutch pedal lever for left hand drive vehicles.
Pedal Pads w/ "M"
Put the big M under your feet. Clutch & Brake Pads for all Morris Minors. These are the earlier style with a big "M" on the foot face. Snap on fit, no tools required.
Clutch Release Linkage Kit
A full complete clutch release linkage kit. Includes all of the components to renew the relay shaft., bushings covers, hardware, springs and clutch lever. Relay bushing is polyurethane for a solid clutch take up and longer life
