Brake Drum
This is a high quality Brake Drum for Morris Minor. It will fit the front from 1948-1953, front and rear 1953-1962 and the rear only from 1963 to 1971. The drum has a high carbon content for long life and excellent wear like the original drums. 7" brake drum. For perfect performance from your brakes the drums must be perfectly smooth and round. You can have your old drums turned if they're not too bad, but there is no specified minimum thickness so you may be taking chances.
FITS:
FITS:
- Morris Minor Front only 1948-1952
- Morris Minor F & R 1953 - 1962
- Morris Minor Rear only 1953-1971
Brake Shoe Set Rear
Shoe Set for 7" rear drum brakes, set of 4. These are new, not relined shoes.
FITS:
FITS:
- Morris Minor 1953-1971 ( all with 7" rear brakes)
Wheel Cylinder 7/8" AP Caparo
Wheel Cylinder, Rear- This is a genuine AP Caparo wheel for the rear.
FITS:
- Morris Minor 1953-1962 (803cc-948cc)
Boot, Handbrake Arm
Rubber Dust and Debris Boot that goes over the handbrake arm on the wheel cylinder
FITS:
- Morris Minor 1953-1971
Brake Shoe Spring Kit - Rear
The most complete rear brake shoe spring and retainer kit available for the 948cc Sprite and Midget. Kit includes This kit includes; (2) Cylinder End Pull off Spring (2) Abutment End Pull off Springs, (2) Brake Shoe Adjusters & Masks, 4 Brake Shoe Retaining Springs, (2) Handbrake Gaiters (boot)
FITS:
FITS:
- Morris Minor 1953-1971
Connector, Banjo
Connector, Banjo for rear wheel cylinders (slave cylinders). As this is a brass piece it if often cross threaded and thus the easy answer is to replace it when you are not sure. The flares on this fitting often get damaged do to over tightening of the brake bleeder. Threads are 3/8" BSF. Requires two copper washers. Copper washers (233220 and 3H550).
FITS:
- Morris Minor 1955 to 1971
Banjo Bolt
Banjo Bolt for connector for rear wheel cylinders (slave cylinders). Threads are 3/8" BSF. Requires two copper washers. Copper washers (233220 and 3H550).
FITS:
- Morris Minor 1955 to 1971
Brake Bleeder
Brake bleeder for connector for wheel cylinders (slave cylinders). Threads are 3/8" BSF.
FITS:
- Morris Minor 1955 to 1971
