Wheel Bearing Kit Front
This front wheel Bearing kit is for all years of Morris Minors. The kit includes both inner and outer wheel bearings plus the seal and Mobil Polyrex™ Grease Packet. Two kits are required per car.
FITS:
FITS:
- Morris Minor 1000 1954-1971
Seal Hub Front
This front wheel Hub Seal is for all years of Morris Minor 1000. Two seals required per car.
FITS:
FITS:
- Morris Minor 1000 1954-1971
Lower Eye Bolt
Eye Bolt for lower suspension (Not Handed) The lower suspension arms pivot on a steel fulcrum pin isolated by rubber bushes. If the bushings wear then the entire lower suspension hangs on the fulcrum pin and this eye bolt which will wear causing excessive play in the front suspension. Fulcrum pin is SUS105 and bushes are available in rubber SUS104 or polyurethane SUS104Q or SUS104P (2 different hardness of the bushing are available)
FITS:
FITS:
- Morris Minor 1948-1971
Fulcrum Pin
This fulcrum pin fits the lower front control front eye bolt and the rear suspension spring shackles. The original pins had 3/8" BSF threads. These replacement items have 3/8" UNF threads. Pins are supplied with proper nuts.
FITS:
FITS:
- Morris Minor 1948-1971
Trunnion Kit-Lower R/HTrunnion for the lower control arm. This is the right hand side trunnion. These high quality trunnions are made in the UK and include high quality seals. These trunnions have the newer style pins with 3/8" UNF threads.
FITS:
|
Trunnion Kit-Lower L/HTrunnion for the lower control arm. This is the left hand side trunnion. These high quality trunnions are made in the UK and include high quality seals. These trunnions have the newer style pins with 3/8" UNF threads.
FITS:
|
Fulcrum Pin-Lower Trunnion
Lower Trunnion Pin. This fulcrum pin carry a great deal of the front suspension load under cornering and rarely gets the lube that it requires. Replacing this pin can save you money by not having to replace the complete trunnion. Original pin had 3/8"BSF threads, these "modern" replacement pins have 3/*" UNF threads and are supplied with proper nuts.
FITS:
FITS:
- Morris Minor 1948-1971
Rebound Check Rubber & Bracket
Shock arm rebound pad and bracket prevents body damage when shock is at full droop. Not Handed
FITS:
FITS:
- Morris Minor 1948-1971
Pivot Kit, Shock Link to Upper Trunnion
The front shock absorber arm also functions as the locating point for the upper suspension arm of the Minor. The shock arm mounts to the pivot shaft and is located in the upper trunnion with the aid of a rubber bushings. These bushing can wear causing the pivot shaft to get damaged. Sold as a kit. Not Handed Included in upper trunnion kit
FITS:
FITS:
- Morris Minor 1948-1971
