Bonnet (Hood) Hinge Set
Chrome looks great on a car, but pitted or worn chrome will detract from an otherwise good looking Minor. These new chrome bonnet hinges are sold by the pair with the body gaskets, and for less than you would pay to rechrome your old ones! The hinges wear in the pin area allowing the bonnet(hood) to wobble when open. New hinges are a great fix for this problem. New hinges are a savoir. These hinges will not fit the earlier split-windscreen Morris Minors.
FITS:
- Morris Minor 1955-1971
Striker Pin, Bonnet Latch
Striker Pin for Hood Latch. This is a non-original pin. Functions as original but is an aftermarket item
FITS:
- Morris Minor - All
Bonnet Catch Striker Guide Plate
Guide Plate for the latch striker pin
FITS:
- Morris Minor -- All
Slider Plate, Bonnet Latch
The upper latch plate the slides to release the striker pin when the release rod is pulled. This plate attaches to the return spring.
FIT:
- Morris Minor - All
Bonnet Catch Return Spring
Bonnet Catch Return Spring
FITS:
- Morris Minor - All
Bonnet (Hood) Safety Catch
The Morris Minor bonnet assembly is very heavy and has a positive latching mechanism. However. the aerodynamics of the car are such that if for any reason the main catch springs open you will very quickly find the bonnet in your windshield. The least that will happen is a broken windshield, bent hood and broken hinges! This safety catch is cast material and is easily broken. A simple pin holds it in place and also makes it easy to replace. A good item to purchase along with the new catch is a the return spring to make certain the catch does function properly.
FITS:
- Morris Minor - All
Bonnet Safety Catch Return Spring
Bonnet (hood) Safety Catch Return Spring. This spring is essential to the function of the safety catch.
FITS:
- Morris Minor - All
Pin, Bonnet Safety Catch
Clevis Pin and Split Pin. This little item holds the safety catch, return spring to the radiator panel. Without this item there isn't a safety catch.
FITS:
- Morris Minor - All
Spring, Anti Rattle, Bonnet Release Rod
Anti Rattle Spring for the Bonnet Release Rod
FITS:
- Morris Minor - All
Bonnet Prop Spring
The Bonnet (hood) prop or support locking spring. This keeps the support from retracting when bumped while a person is working under the bonnet. Nice safety item
FITS:
- Morris Minor - All
Bonnet Flash Lift Handle With Enamel Badge
Bonnet (hood) Flash with enamel badge.
FITS:
- Morris Minor 52-62 Series II and 1000 Sedans, Travellers, Tourers & Convertibles
Bonnet (hood) Lift Handle ("M" Flash)
The deluxe chrome bonnet (hood) flash with the "M" embossed on the sides. Can be fitted to Commercial (LCV) vehicles as the attaching points are the same as the chrome flash strip.
FITS:
- Morris Minor - 1962-1971 Sedan, Travellers, Tourers
Bonnet (Hood) Front Badge-Chrome with Bull
Chrome, blue and red front Emblem from Morris Minor 1000 with spire. Can be used on MM and Series II. Will also fit LCVs.
FITS:
- Morris Minor - 1956-1971 Sedan, Traveller and Tourer
Bonnet (Hood) Front Badge-Chrome MM, Series II, Van-Pick-Up
Bonnet Font Badge for MM Series II and all LCV (Commercial) This emblem does not have the spire.
FITS:
- Morris Minor - 1948-1953
- Morris Minor Series II - 1954-1956
- Commerical (Pick Up / Van) - ALL
"MINOR 1000" LOGO Bonnet Side
"MINOR 1000" LOGO BONNET SIDE
FITS:
- Morris Minor 1956-1971 Saloon, Tourer, Traveller
