Clutch Master Cylinder Metal Body
This original metal canister master cylinder for SAAB with Lockheed embossed on the can part has been available from us since August 2003 and are manufactured to OEM specification by AP. They are designed to use original specification DOT 4 or 5 hydraulic fluid as specified in the vehicles hand book/workshop manual. These cylinders are not designed to use of any other type of fluid. Now electroplated bright zinc followed by a clear hex-valent chrome free passivate to stop surface corrosion.-The reason for this is that all products required to be free of Hexavalents by 2007 which gave a gold color during the plating process.
FITS:
- SAAB 96 1969-1980
- SAAB 95 1969-1978
- SAAB 97 Sonett III 1969-1974
- SAAB 99 1968-1975
MASTER CYLINDER, (with plastic cap), 5/8" bore
Master Cylinder with 5/8" bore and plastic cap. requires the push rod to be replaced with the yolked style rod
FITS:
- SAAB 96 1965 to 1968
- SAAB 95 1965 to 1968
- SAAB Sonett 1967-1974
Pushrod, Master Cylinder
Pushrod, yoke style for Master Cylinder. This pushrod is 3" long from center of pin to ball end.
FITS:
- SAAB 96 1965 to 1968
- SAAB 95 1965 to 1968
- SAAB Sonett 1967 to 1974
Cap, Master Cylinder
Original style metal cap for the master cylinder
