Banjo Master Cylinder to Front Brake Pipe
Banjo for the rear of the master cylinder. The CBS143 banjo bolt as used on the rear of the brake master cylinder slides through the eye of this fitting and the front brake pipe is attached to the internal threads. As this is a brass piece it if often cross threaded and thus the easy answer is to replace it when you are not sure. The flares on this fitting often get damaged do to over tightening of the brake pipe. Threads are 3/8" BSF. Requires two copper washers. Copper washers (233220 and 3H550).
- Morris Minor 1948-1971