Heater Rheostat Switch
Heater switch for Morris Minor with round heater. Two different switches were originally fitted - the earlier used a knob retained by a screw, the later used a push-on knob retained by a spring-loaded stud. Switches supplied are of the later type.
Round Heater Switch Knob
This knob fits the current switch that we carry. This later style knob is a push-on knob retained by a spring-loaded stud. The original switches used a screw to retain the knob. See our listing for HTR 126 for the screw style knob.
Heater Switch Knob
The earlier or original style switch used a knob retained by a screw. This is the correct knob for the early switch.
Trunnion HEATER Cable
The choke cable connects to the carburetor linkage by a little barrel bodied stop referred to as a trunnion or cable stop. The hex head of the body is larger than the hole in the linkage arm and the cable slips through the body hole on the the backside of the arm. The screw pushes the cable tight against the body of the trunnion allowing the inner cable to pull the arm up.
FITS:
- Morris Minor - 1963-1971
