MASTER CYLINDER, (with plastic cap), 3/4" bore
Master Cylinder with 3/4" bore and plastic cap. The inlet has thread size of 7/16" x24 and the clevis rod is 3" long. TRW has changed the mold on their cylinders so the units no longer carry the Girling name cast into the side of the cylinder. This cylinders now have a plastic cap but the original metal cap (500201) is still available and fits the newer style castings. This cylinder and the later .70 cylinder are interchangeable. However, the bigger bore of this cylinder will give more clutch travel then the later cylinder. Very little difference in pedal pressure.
- Nash Metropolitan (c) E-11001 - E-29283
Push Rod Slave Cylinder
Push rod for slave cylinder to clutch fork. The rod length is 2.75 inches overall (2.375 end to center of hole) Sold as a set with correct clevis pin & stainless steel cotter pin. Recommended to replace whenever you are replacing clutch or the slave cylinder.
- Metropolitan From E11001